日産自動車推奨の充電設備設置会社

V2H / V2X充放電設備

施工実績

3,000件以上

 ※全車メーカー様設置実績を含む


JMは電気工事士の有資格者による
安心施工と約3,000件のV2H(V2X)充放電設備の
設置実績を誇ります。
※他社製のV2Hも含みます。

Japan Management

オムロンソーシアル
ソリューションズ株式会社製

Application for setting is this

マルチV2Xシステムとは

マルチV2Xの特長

■ 水害に強い壁掛け
※建物の状況によっては壁掛け出来ない事があります。​​

電気自動車の充電ポートの位置や使い勝手に合わせて、
充放電コネクタの取り付け位置を選ぶことができます。

■ 耐環境性能に優れ10年長期保証

■ 外出先から充電操作可能​

スマートフォンアプリで、いつでもどこでも充電・放電をコントロール。急に電気自動車に乗ることになっても、外出先から充電残量をチェックしてすぐに充電を開始することができます。

■ 停電時  災害等で停電になった時もすべての家電(※)に自動給電し、​普段通りの生活も可能

倍速の最大6kW充電に加え、EVから住宅への放電も可能です。
また、太陽光発電システムが設置されていれば、 一緒に使うことでエコで経済的な生活を実現できます。

※停電時に必要のない機器を接続して使い続けると、電気自動車の蓄電池の残量が不足し、ご家庭内で電気が使えなくなる場合があります。
必要により機器をOFF、またはブレーカを落としてください。

スタイリッシュで水害に強い壁掛け、災害時に家丸ごとEVから自動非常電源供給、
耐環境性能に優れ10年長期保証、外出先から充電操作可能です。

このようにEVの価値を最大限に高める「マルチV2Xシステム」の設置を是非ご検討ください。

マルチV2Xシステム本体について

マルチV2Xシステム(写真はEVユニット)

オムロン(株)製マルチV2Xシステム

オムロン(株)製マルチV2Xシステム

基本価格

①機器セット本体

単機能V2Xシステム
一般タイプ 一般タイプ
×
蓄電池・エネファーム
併設連携
重塩害対応タイプ 重塩害対応タイプ
×
蓄電池・エネファーム
併設連携
KPEP-A-SET-AC KPEP-A-SET-AC-EF KPEP-A-SET-AC-S KPEP-A-SET-AC-EF-S
1,100,000円(税込) 1,210,000円(税込) 1,265,000円(税込) 1,320,000円(税込)

②指定部材セット
77,000円(税込)~
※配線の長さより変わります。詳しくは基本工事価格をご確認ください。

③基本工事価格
385,000円(税込)~
※配線の長さより変わります。詳しくは基本工事価格をご確認ください。

※対応車種についてはオムロンソーシアルソリューションズ株式会社のWebサイトをご確認ください。

※併設が可能な太陽光発電用パワーコンディショナについては同Webサイトの資料ダウンロードメニューからご確認ください。

* For product details同Webサイトをご確認ください。

設置概要・価格​

一般タイプ 一般タイプ
x
蓄電池・エネファーム
併設連携
重塩害対応タイプ 重塩害対応タイプ
x
蓄電池・エネファーム
併設連携
KPEP-A-SET-AC KPEP-A-SET-AC-EF KPEP-A-SET-AC-S KPEP-A-SET-EF-S
メーカー小売価格 1,760,000円(税込) 1,848,000円(税込) 1,925,000円(税込) 2,013,000円(税込)
マルチV2Xパワコンの定格容量 5.9kW(力率0.95)
連系運転時入出力電力 5.9kVA(交流側)
自立運転入出力電力 6.0kVA(交流側)
停電時太陽光発電設備からの供給
cable length 7.5m
Salt resistant specification 海岸及び汽水域から500mを超える 海岸及び汽水域から500mを超える 海岸及び汽水域から500m以内 海岸及び汽水域から500m以内
メーカー保証 10年
リモコン操作(アプリ)
  • ※重塩害対応タイプは、海岸及び汽水域から500m以内の地域で屋外に設置できます。
    海水のしぶきが直接かかるところには屋外に設置できません。​
  • ※設置場所調査の結果、電気の契約容量の変更に係る作業、自立スタンドの設置、追加の配線工事やアース線の敷設等が必要となる場合があります。​
    In that case, additional costs will occur. (For details, please refer to "Additional cost")

指定部材セット価格/基本工事価格

指定部材セット価格と基本工事価格はマルチV2XパワコンからEVユニットまでの距離と、
全負荷分電盤からマルチV2Xパワコンまでの距離により8つに分類されます。

3m 7m 20m 30m
14m 指定部材セット1
77,000円
指定部材セット2
88,000円
指定部材セット3
132,000円
指定部材セット5
170,500円
25m 指定部材セット1
77,000円
指定部材セット2
88,000円
指定部材セット4
148,500円
指定部材セット5
170,500円

例:パワコン~EVユニットまでが20m、全負荷分電盤~パワコンまでが14mの場合:指定部材セット3(132,000円)となります。

※価格は税込み表示です。

3m 7m 20m 30m
14m 基本工事価格①
385,000円
基本工事価格②
396,000円
基本工事価格③
440,000円
基本工事価格④
451,000円
25m 基本工事価格⑤
434,500円
基本工事価格⑥
445,500円
基本工事価格⑦
489,500円
基本工事価格⑧
500,000円

例:パワコン~EVユニットまでが3m、全負荷分電盤~パワコンまでが14mの場合:基本工事価格①(385,000円)となります。

If the following work is required as a result of the installation location survey, a separate fee will be charged.
※家屋の状況により金額が異なる場合があります。

工事項目 Work content 費用(税込)
契約変更 申請電気の契約容量を変更する際の申請手続きを弊社が代行する費用 ¥16,500
Replacing the main line Cost of changing the main line when changing the contracted capacity of electricity
Less than 10m
¥49,500
10m or more ¥66,000
Replacing the main switch The cost of replacing the ELB when changing the contracted capacity of electricity
40A-60A
¥27,500
75A-100A ¥38,500
Replacing the distribution board 単相2線式から単相3線式への変更 ¥38,500
Additional wiring 10mを超えて、1mごとの作業
CV-VVR 2.6mm・5.5sq
¥1,210
CV 8sq ¥1,650
CV 14sq ¥2,970
Buried pipe 1mごとの工事費用 ¥1,980
Laying the earth wire Cost of grounding to another place when the distribution board does not have a ground terminal ¥6,050
Wall penetration ① 特殊な壁の場合の壁穴貫通作業の費用 例)鉄筋コンクリート造の場合 ① ¥6,050
② レントゲン調査費用 ② ¥165,000
Installation of SW at hand Countermeasures against power theft of outlets ¥14,300

設置費用(概算)のケーススタディー

ケースA※壁付けできないご家庭で設置する場合

機器セット本体 単機能V2Xシステム(一般タイプ) 1,100,000円
パワコン~EVユニット3m、全負荷分電盤~パワコン14mの場合 指定部材セット1 77,000円
パワコン~EVユニット3m、全負荷分電盤~パワコン14mの場合 基本工事価格① 385,000円
壁付設置できない場合には、自立スタンドを設置します。 自立スタンド本体費 108,900円
The installation location is in the state of soil and gravel 自立スタンド用基礎(プレキャスト)の設置 送料含む 55,000円
合計(税込) 1,725,900円

ケースB※重塩害地にお住まいで、太陽光発電・蓄電池をすでに設置されているお客様

機器セット本体 単機能V2Xシステム
(重塩害対応タイプ×蓄電池・エネファーム併設連携)
1,320,000円
パワコン~EVユニット3m、全負荷分電盤~パワコン14mの場合 指定部材セット1 77,000円
パワコン~EVユニット3m、全負荷分電盤~パワコン14mの場合 基本工事価格① 385,000円
ご自宅の分電盤が75A以上の容量の場合 回路を集約するための分電盤設置 33,000円
ご自宅の契約電気容量によって、設置が必要 開閉器の設置(100A) 28,600円
太陽光設備あり 設置認定代行申請費 33,000円
合計(税込) 1,876,600円

お支払い方法について

You can choose from three payment methods. Loans are also available if you install JM.

Transfer

Please transfer within 7 days to the designated account described in the invoice. The transfer fee will be borne by the customer.

pay by a credit card

・クレジット決済は設置契約頂いた方のクレジットカードのみ可能です。
・ご利用いただけるクレジットカードは下記の通りです。

Shopping credit

・設置契約をいただいたご本人様のみ利用いただけます。(20歳未満は不可)
・法人のお客様はご利用いただけません。
・発注は、ローン会社の審査通過後にお願いします。
・ローンは弊社が加盟店契約を結ぶ「株式会社セディナ」との契約になります。
・ローンの利息や支払回数はHereをご覧ください。

About procedure flow

※1 必ず決定権者様の立会いをお願いします。
※2 お支払い方法を申告願います。
※3 ローンを利用しない場合、⑤⑥の工程は発生しません。
※4 見積金額をご確認の後、お客様のメールに届くURLまたは弊社コールセンターへのお電話にて、 発注願います。
※5 太陽光発電設備との接続のない場合、申請は不要となります。

About setting

01Application

01Application

Please apply after describing the prescribed content from our website.
ご不明点などありましたら、弊社コールセンター(0120-81-7048)までお電話にてお問い合わせください。

02Survey of installation location (home, etc.) / 所要時間:約1〜2時間

02Survey of installation location (home, etc.) / 所要時間:約1〜2時間

  • ご自宅等の現在の契約電力容量を確認し、充電設備の設置に支障がないことを確認します。契約容量の変更についてはお気軽にご相談ください。注:電気の契約容量変更のご判断は、お客様となります。
  • マルチV2Xシステムから放電される回路を含む配線経路等の調査を行います。
  • 駐車スペース等、マルチV2Xシステム本体の設置位置を決定します。

03Send quote/ Number of days required: On the day of the principle survey

03Send quote/ Number of days required: On the day of the principle survey

We will send you a quotation after investigating the installation location. Please check the contents.

04Order

04Order

Please place an order using the URL that will be sent to your email when you send the quotation or by calling our call center.
After ordering, JM will take the following actions:

  • We will decide the installation date based on your convenience.
  • Apply to the power company as follows.
    ① Application for changing contract capacity (customers who change)
    ② Grid connection application work (all customers)
  • Application for facility certification to the Bureau of Economy, Trade and Industry. (Customers who have installed solar power generation equipment)

We ask our customers to take the following actions.

  • When paying for shopping credits After the approval is given, if there is a connection with the solar power generation facility, the construction will be done after the approval of the Bureau of Economy, Trade and Industry.
  • If you cancel after ordering, you will be charged separately for the main unit price and cancellation fee.

05Installation / 所要時間:約4時間30分~約6時間30分

05Installation / 所要時間:約4時間30分~約6時間30分

  • It will be installed after the approval for the grid connection application submitted to the power company has been approved.
  • After confirming the details of the field survey and signing the order form, the work will begin.
  • Application for facility certification to the Bureau of Economy, Trade and Industry. (Customers who have installed solar power generation equipment)
  • Indoor construction

    We will install a special breaker and a switchboard with a switching device, and perform work such as wiring.

  • Outdoor construction

    We will carry out work such as wall through hole construction, wiring and piping installation, and charger installation.

  • Blackout

    The work of connecting the wiring to the distribution board takes a short time, but it also involves a power failure.
    Please take measures in advance such as prevention of data loss on the PC and resetting the timer.

  • Operation check

    After connecting the communication device, check the operation of the main unit. In addition, from the viewpoint of privacy protection, the connection with the router at home is your own connection.

06Installation completed

06Installation completed

Please confirm that the power is on, and that the work you ordered and the condition after construction are the same. After explaining the handling, maintenance, and after-sales service of the charger using the "Instruction Manual", sign the "Construction completion confirmation" to complete the installation.

アフターサービスはコールセンターにてお受けいたします

JM Call Center
( EV · PH EV only)

Japan Management

0120-81-7048

Japan Management

When inquiring, it is stuck in the distribution boardAfter-sales service stickerMentioned in9桁の工事番号をお伝えください。お客様の設置履歴を確認し、迅速に対応いたします。
※ From 9 o'clock to 18 o'clock inquiries. From 18 o'clock to 9 o'clock the reception will be accepted only for after-sales service.

FAQ

設置場所調査完了後、お見積書を提出いたします。見積内容をご確認いただいた上で、ご発注ください。
見積書メールにあるURLの「発注へすすむ」から申し込みできます。
お電話でのご発注は弊社コールセンター 0120-81-7048(平日・土日 9-18時)へご連絡ください。

Estimates for installation in detached houses are free.
戸建て住宅以外への設置についてのお見積りは有料となります。離島については別途交通費を頂戴します。

V2H関連のみ対応しております。上棟後に現地調査に伺います。上棟の目途が立った段階でお申込みください。
現地にて機器の設置場所や住宅メーカー様と弊社間の工事区分について決定後、御見積書を提示いたします。

お申込みフォームのメールアドレス記入欄に 「jm-ev@system.matabee.com」とご記入ください。

EVコンセント等の普通充電器は約3~4週間のお時間をいただきます。V2HやV2X等の充放電機器は1か月~3か月ほどのお時間をいただきます。
但し、電力契約の変更や補助金申請をする場合などはさらに時間を要することがあります。

支払方法は、銀行振込・クレジット決済のみになります。現金でのお支払いには対応しておりません。
クレジット決済はPCのメールアドレスまたはスマートフォンをご利用のお客様に限ります。お支払い方法については、普通充電工事は工事完了時、V2Hは現地調査時に確認いたします。

お申込みいただけます。ただし、パンフレットにある設置基本価格は適用されません。設置場所調査の結果に従ってお見積りいたします。

It takes about 1 to 2 hours for installation place survey and about 4 hours 30 minutes to about 6 hours 30 minutes for installation.
工事の際は停電作業も発生致します。PCや家電製品の電源のOFFの作業等はお客様にてお願いしております。
Please stay at home while setting up.

弊社のホームページからお申込みいただいた後、工事担当者からお電話またはメールにてご連絡いたします。
お客様のご都合を伺い、日程を決定させていただきます。
現地調査及び工事の日程調整の際に電話にてご連絡させていただくことが多いので、着信拒否等設定を解除するようにお願いいたします。

Click here to apply for a quote